Ip Rip Receive Version - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
6.2.1.1
Related ip split-horizon
Commands

ip rip receive version

To receive specific versions of RIP, set the interface. The RIP version you set on the interface overrides
the version command in ROUTER RIP mode.
Syntax
ip rip receive version [1] [2]
To return to the default, use the no ip rip receive version command.
Parameters
1
2
Defaults RIPv1 and RIPv2
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
1542
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the RIP routing updates to exclude routing prefixes.
(OPTIONAL) Enter the number 1 for RIP version 1.
(OPTIONAL) Enter the number 2 for RIP version 2.
Description
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Routing Information Protocol (RIP)