Pim-Source Specific Mode (Pim-Ssm) - Dell Z9500 Command Reference Manual

PIM-Source Specific Mode (PIM-SSM)

The protocol-independent multicast source-specific mode (PIM-SSM) commands in this section are
supported in the Dell Networking operating system.
IPv4 PIM Commands
The following commands apply to IPv4 PIM-SM, IPv4 PIM-SSM, and PIM-DM.
• clear ip pim tib
• debug ip pim
• ip pim dr-priority
• ip pim neighbor-filter
• ip pim query-interval
• show ip pim interface
• show ip pim neighbor
• show ip pim tib
IPv4 PIM-Source Specific Mode Commands
The following IPv4 PIM-source specific mode (PIM-SSM) commands are supported:
• ip pim ssm-range
• show ip pim ssm-range
ip pim ssm-range
Specify the SSM group range using an access list.
Syntax
ip pim [vrf vrf-name] ssm-range {access_list_name}
Parameters
vrf vrf-name
1418
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to specify the SSM group range for that VRF.
PIM-Source Specific Mode (PIM-SSM)
38