Mac Learning-Limit Learn-Limit-Violation - Dell Z9500 Command Reference Manual

another interface. Enabling or disabling this option has no effect on already learned
MAC addresses.
After the MAC address learning limit is reached, the MAC addresses do not age out
unless you add the dynamic option. To clear statistics on MAC address learning,
use the clear counters command with the learning-limit parameter.
When a channel member is added to a port-channel and there is not enough ACL
CAM space, the MAC limit functionality on that port-channel is undefined. When
this occurs, un-configure the existing configuration first and then reapply the limit
with a lower value.
Related
clear counters
Commands
clear mac-address-table
learned dynamically.
mac learning-limit mac-address-sticky
parameter.
show mac learning-limit

mac learning-limit learn-limit-violation

Configure an action for a MAC address learning-limit violation.
Z9500
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown} command.
Parameters
log
shutdown
Defaults none
Command INTERFACE (conf-if-interface-slot/port)
Modes
Layer 2
NOTE: If you configure this command on an interface in a routed VLAN, and
after the MAC addresses learned reaches the limit set in the mac learning-
limit command, IP protocols are affected. For example, VRRP sets multiple
VRRP Masters and OSPF may not come up.
— Clear counters used in the show interface command.
— clears the MAC address table of all MAC address
— displays MAC learning-limit configuration.
Enter the keyword log to generate a syslog message on a
learning-limit violation.
Enter the keyword shutdown to shut down the port on a
learning-limit violation.
— Replaces deprecated no-station-move
1143