Show Ip Cam Linecard - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

Name/address lookup uses static mappings

Name servers are not set

-------- -----

show ip cam linecard

View CAM entries for a port pipe on a line card.

show ip cam linecard slot-id port-set pipe-number [ip-address

mask [longer-prefix] | ecmp-group [details | member-info] |

mask [longer-

member-info}

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

IPv4 Routing

(perm, OK) -

— views the DNS resolution.

— configures a host.

Enter the slot ID of the line card. The range of Z9500 slot IDs

is from 0 to 2.

Enter the number of a line card's port-pipe. The range is

from 0 to 3.

(OPTIONAL) Enter the IP address and mask of a route to

CAM entries for that route only. Enter the keyword longer-

prefixes to view routes with a common prefix.

(OPTIONAL) Enter the keyword ecmp-group and specify if

you want to display detailed CAM information about an

ECMP group or about individual ECMP-group member ports.

(OPTIONAL) Enter the keyword summary to view a table

listing route prefixes and the total number of routes that can

be entered into the CAM.

EXEC Privilege