Show Running-Config Pim - Dell Z9500 Command Reference Manual

show running-config pim

Display the current configuration of PIM-SM snooping.
Syntax
show running-config pim
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.1)
8.3.19.0
8.3.12.0
8.3.11.1
8.4.1.0
Example
Dell#show running-config pim
!
ip pim snooping enable
IPv6 PIM-Sparse Mode Commands
The following describes the IPv6 PIM-sparse mode (PIM-SM) commands.
clear ipv6 pim tib
Clear the IPv6 PIM multicast-routing database (tree information base-TIB).
Z9500
Syntax
clear ipv6 pim tib [group-address]
Parameters
group-address
PIM-Sparse Mode (PIM-SM)
Description
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
(OPTIONAL) Enter the multicast group address in the
x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
1403