Metric-Style - Dell Z9500 Command Reference Manual

Version
8.3.12.0
8.3.11.1
7.8.1.0
6.3.1.0

metric-style

To generate and accept old-style, new-style, or both styles of type, length, and values (TLV), configure a
router.
Z9500
Syntax
metric-style {narrow [transition] | transition | wide
[transition]} [level-1 | level-2]
To return to the default values, use the no metric-style {narrow
[transition] | transition | wide [transition]} [level-1 |
level-2] command.
Parameters
narrow
transition
wide
level-1
level-2
Defaults narrow; if no Level is specified, Level-1 and Level-2 are configured.
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
1102
Description
Introduced on the S4810.
Introduced on the Z9000.
Added support for multi-topology ISIS.
Introduced.
Allows you to generate and accept old-style TLVs. The
metric range is from 0 to 63.
Allows you to generate both old-style and new-style TLVs.
The metric range is from 0 to 63.
Allows you to generate and accept only new-style TLVs. The
metric range is from 0 to 16777215.
Enables the metric style on Level 1.
Enables the metric style on Level 2.
Description
Introduced on the Z9500.
Intermediate System to Intermediate System (IS-IS)