Dell Z9500 Command Reference Manual page 1702

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
8.1.1.0
7.7.1.0
7.6.1.0
6.2.1.1
Usage
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in
Information
the following example always displays a value of zero.
Example
Dell#show sflow
sFlow services are enabled
Global default sampling rate: 32768
Global default counter polling interval: 20
1 collectors configured
Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116,
UDP port: 6343
0 UDP packets exported
0 UDP packets dropped
165 sFlow samples collected
0 sFlow samples dropped due to sub-sampling
Linecard 1 Port set 0 H/W sampling rate 8192
sampling rate 1
sampling rate 2
Linecard 3 Port set 1 H/W sampling rate 16384
sampling rate 1
Dell#
1702
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Te 1/16: configured rate 8192, actual rate 8192, sub-
Te 1/17: configured rate 16384, actual rate 16384, sub-
Te 2/40: configured rate 16384, actual rate 16384, sub-
sFlow