Dell Z9500 Command Reference Manual page 1727

Hide thumbs Also See for Z9500:

Table of Contents

To remove an SNMPv3 view, use the no snmp-server view view-name oid-

tree {included | excluded} command.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The oid-tree variable is a full sub-tree starting from 1.3.6 and cannot specify the

name of a sub-tree or a MIB. The following Example configures a view named

rview that allows access to all objects under 1.3.6.1.

Dell#(conf) snmp-server view rview 1.3.6.1 included

show running-config

Simple Network Management Protocol (SNMP) and Syslog

Enter the name of the view (not to exceed 20 characters).

Enter the OID sub tree for the view (not to exceed 20

characters).

(OPTIONAL) Enter the keyword included to include the MIB

family in the view.

(OPTIONAL) Enter the keyword excluded to exclude the

MIB family in the view.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

snmp — displays the SNMP running configuration.