Hello-Time - Dell Z9500 Command Reference Manual

Parameters
seconds
Defaults 15 seconds
Command SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.5.1.0
6.2.1.1
Related
max-age
Commands
information.

hello-time

hello-time
Set the time interval between generation of the spanning tree bridge protocol data units (BPDUs).
Z9500
Syntax
hello-time seconds
To return to the default value, use the no hello-time command.
Parameters
seconds
Spanning Tree Protocol (STP)
Enter the number of seconds the system waits before
transitioning STP to the Forwarding state. The range is from
4 to 30. The default is 15 seconds.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the wait time before STP refreshes protocol configuration
— changes the time interval between BPDUs.
Enter a number as the time interval between transmission of
BPDUs. The range is from 1 to 10. The default is 2 seconds.
1773