Dot1X Reauth-Max - Dell Z9500 Command Reference Manual

Parameters
interval
seconds
Defaults 3600 seconds (1 hour)
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.4.1.0
Related interface range
Commands

dot1x reauth-max

Configure the maximum number of times a port can re-authenticate before the port becomes
unauthorized.
Z9500
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
number
Defaults 2
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
1648
(Optional) Enter the keyword interval then the interval
time, in seconds, after which re-authentication is initiated.
The range is from 1 to 31536000 (1 year). The default is3600
(1 hour).
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
— configures a range of interfaces.
Enter the permitted number of re-authentications. The range
is from 1 to 10. The default is 2.
Security