Show Ip Pim Summary - Dell Z9500 Command Reference Manual

(*, 225.1.2.1), uptime 00:00:01, expires 00:02:59, RP
165.87.70.1, flags: J
Dell#show ip pim snooping tib vlan 2 225.1.2.1 165.87.1.7
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
Timers: Uptime/Expires
* : Inherited port
(165.87.1.7, 225.1.2.1), uptime 00:00:08, expires 00:02:52,
flags: j

show ip pim summary

View information about PIM-SM operation.
Z9500
Syntax
show ip pim [vrf vrf-name] summary
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.1)
8.3.19.0
8.3.12.0
8.3.11.1
8.4.1.1
8.1.1.0
PIM-Sparse Mode (PIM-SM)
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
TenGigabitEthernet 2/11 RPF 165.87.32.2 00:00:01/00:02:59
TenGigabitEthernet 2/13 Upstream Port
SGR-P - (S,G,R) Prune
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
TenGigabitEthernet 2/11 Upstream Port
TenGigabitEthernet 2/13 DR Port
TenGigabitEthernet 2/20 RPF 165.87.32.10 00:00:08/00:02:52
EXEC
EXEC Privilege
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Support for the display of PIM-SM snooping status was
added on E-Series ExaScale.
Introduced on the E-Series ExaScale.
-/-
-/-
-/-
1399