Dell Z9500 Command Reference Manual page 831

Hide thumbs Also See for Z9500:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

This command displays the IGMP database, including configured entries for either

all groups on all interfaces, all groups on specific interfaces, or specific groups on

specific interfaces.

The following describes the show ip igmp groups command shown in the

following example.

Group Address

Last Reporter

Member Ports

Dell#show ip igmp snooping groups

Total Number of Groups: 1

IGMP Connected Group Membership

Group Address

Internet Group Management Protocol (IGMP)

For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

(OPTIONAL) Enter the keyword detail to display the

IGMPv3 source information.

EXEC Privilege

Introduced on the S4810, S4820T, S5000, S6000, Z9000,

Lists the multicast address for the IGMP group.

Lists the interface type, slot and port number.

Displays the IGMP version used.

Displays the amount of time the group has been

operational.

Displays the amount of time until the entry expires.

Displays the IP address of the last host to be a member of

the IGMP group.

Indicates the port channel. If the port channel is VLT, an

asterisk (*) after the port channel number indicates the port

channel is locally down and that a remote VLT port is up.

Last Reporter

IGMPv2-Compat