Version
8.3.11.1
8.3.7.0
Related
ipv6 nd dad attempts
Commands
to zero.
show ipv6 interface
Display the status of interfaces configured for IPv6.
Z9500
Syntax
show ipv6 interface interface [linecard slot-id] [brief]
[configured][loopback interface-number] [managementethernet
slot/port] [port-channel number][tengigabitethernet slot |
slot/port] [fortyGigE slot | slot/port] [tunnel tunnel-id]
[vlan vlan-id]
Parameters
interface
linecard slot-id
brief
configured
1036
Description
Introduced on the Z9000.
Introduced on the S4810.
— Configure system to set the flow label field in the packets
(OPTIONAL) Enter the following keywords and slot/port or
number information:
•
For a Loopback interface, enter the keyword Loopback
then a number from 0 to 16383.
•
For the Null interface, enter the keyword null then zero
(0).
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
•
For a tunnel interface, enter the keyword tunnel then
the tunnel ID.
•
For a VLAN interface, enter the keyword VLAN.
•
For a port channel interface, enter the keywords port-
channel.
Enter the linecard slot-id parameters to specify the
Z9500 ports on a line card. The range of slot IDs is from 0 to
2.
(OPTIONAL) View a summary of IPv6 interfaces.
(OPTIONAL) View information on all IPv6 configured
interfaces.
IPv6 Basics