Dell Z9500 Command Reference Manual page 1725

encrypted
auth
md5 | sha
auth-password
priv des56
priv password
access access-
list-name
ipv6 access-
list-name
access-list-
name ipv6
access-list-
name
Defaults As above.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Simple Network Management Protocol (SNMP) and Syslog
(OPTIONAL) Enter the keyword encrypted to specify the
password appear in encrypted format (a series of digits,
masking the true characters of the string).
(OPTIONAL) Enter the keyword auth to specify
authentication of a packet without encryption.
(OPTIONAL) Enter the keyword md5 or sha to designate the
authentication level.
• md5 — Message Digest Algorithm
• sha — Secure Hash Algorithm
(OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host. Minimum: eight characters long.
(OPTIONAL) Enter the keywords priv des56 to initiate a
privacy authentication level setting using the CBC-DES
privacy authentication algorithm (des56).
(OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the host to encrypt the contents of
the message it sends to the agent. Minimum: eight
characters long.
(Optional) Enter the standard IPv4 access list name (a string
up to 16 characters long).
(Optional) Enter the keyword ipv6 then the IPv6 access list
name (a string up to 16 characters long).
(Optional) Enter both an IPv4 and IPv6 access list name.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
1725