Rmon Event - Dell Z9500 Command Reference Manual

Version
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0

rmon event

Add an event in the RMON event table.
Z9500
Syntax
rmon event number [log] [trap community] [description string]
[owner name]
To disable RMON on an interface, use the no rmon event number [log]
[trap community] [description string] command.
Parameters
number
log
trap
community
description
string
owner name
Defaults As noted in the Parameters section.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Remote Monitoring (RMON)
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Assign an event number in integer format from 1 to 65535.
The number value must be unique in the RMON event table.
(OPTIONAL) Enter the keyword log to generate an RMON
log entry. The log entry is triggered and sets the eventType in
the RMON MIB to log or log-and-trap. The default is No log.
(OPTIONAL) Enter the keyword trap then an SNMP
community string to configure the eventType setting in the
RMON MIB. This keyword sets either snmp-trap or log-and-
trap. The default is public.
(OPTIONAL) Enter the keyword description then a string
describing the event.
(OPTIONAL) Enter the keyword owner then the name of the
owner of this event.
1565