Maximum-Paths - Dell Z9500 Command Reference Manual

Version
7.6.1.0
6.2.1.1
Related ip poison-reverse
Commands

maximum-paths

Set RIP to forward packets over multiple paths.
Z9500
Syntax
maximum-paths number
To return to the default values, use the no maximum-paths commands.
Parameters
number
Defaults 4
Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
6.2.1.1
Usage RIP supports a maximum of 16 ECMP paths.
Information
Routing Information Protocol (RIP)
Description
Introduced on the C-Series.
Introduced on the E-Series.
— sets the prefix for RIP routing updates.
Enter the number of paths. The range is from 1 to 16. The
default is 4 paths.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1545