Version - Dell Z9500 Command Reference Manual

version

Specify either RIP version 1 or RIP version 2.
Z9500
Syntax
version {1 | 2}
To return to the default version setting, use the no version command.
Parameters
1
2
Defaults The system sends RIPv1 and receives RIPv1 and RIPv2.
Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
6.2.1.1
Related
ip rip receive version
Commands
ip rip send version
1560
Enter the keyword 1 to specify RIP version 1.
Enter the keyword 2 to specify RIP version 2.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the RIP version the interface receives.
— sets the RIP version the interface sends.
Routing Information Protocol (RIP)