Version
9.1.(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Usage
The following describes the show vlan command shown in the following
Information
example.
Column Heading
(Column 1 — no
heading)
NUM
Status
Q
1158
Description
Updated to support OpenFlow.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Augmented to display PVLAN data for the C-Series and S-
Series and revised the output to include the Description field
to display a user-entered VLAN description.
Introduced on the S-Series and revised the output to display
Native VLAN.
Introduced on the C-Series.
Introduced on the E-Series.
Description
•
asterisk symbol (*) = Default VLAN
•
G = GVRP VLAN
•
P = primary VLAN
•
C = community VLAN
•
I = isolated VLAN
•
O = OpenFlow
Displays existing VLAN IDs.
Displays the word Inactive for inactive VLANs and the word
Active for active VLANs.
•
Displays G for GVRP tagged
•
M for member of a VLAN-Stack VLAN
•
T for tagged interface
•
U for untagged interface
•
x (not capitalized x) for Dot1x untagged
•
X (capitalized X) for Dot1x tagged
•
o (not capitalized o) for OpenFlow untagged
•
O (capitalized O) for OpenFlow tagged
•
H for VSN tagged
•
i (not capitalized i) for Internal untagged
•
I (capitalized I) for Internal tagged
•
v (not capitalized v) for VLT untagged
•
V (capitalized V) for VLT tagged
Layer 2