Vlan Max-Age - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
vlan bridge-priority
Commands
vlan forward-delay
forwarding state.

vlan max-age

show spanning-tree pvst
vlan max-age
To maintain configuration information before refreshing that information, set the time interval for the
PVST+ bridge.
Z9500
Syntax
vlan vlan-range max-age seconds
To return to the default, use the no vlan max-age command.
Parameters
vlan vlan-range
max-age
seconds
Defaults 20 seconds
Command CONFIGURATION (conf-pvst)
Modes
Per-VLAN Spanning Tree Plus (PVST+)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— sets the bridge-priority value.
— changes the time interval before the system transitions to the
— changes the time interval before PVST+ refreshes.
— displays the PVST+ configuration.
Enter the keyword vlan then the VLAN numbers. The range
is from 1 to 4094.
Enter the keywords max-age then the time interval, in
seconds, that the system waits before refreshing
configuration information. The range is from 6 to 40
seconds. The default is 20 seconds.
1471