Protocol Spanning-Tree Rstp - Dell Z9500 Command Reference Manual

Version
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
forward-delay
Commands
state.
hello-time

protocol spanning-tree rstp

To configure RSTP, enter RSTP mode.
Z9500
Syntax
protocol spanning-tree rstp
To exit RSTP mode, use the exit command.
Defaults Not configured
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
1584
Description
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the wait time before RSTP transitions to the Forwarding
— changes the time interval between BPDUs.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Rapid Spanning Tree Protocol (RSTP)