Version
8.2.1.0
8.1.1.0
7.7.1.0
7.6.1.0
7.4.1.0
Usage
This command sets the counter polling interval for an interface.
Information
Related
sflow polling-interval (Global)
Commands
sflow sample-rate (Global)
Change the global default sampling rate.
Z9500
Syntax
sflow sample-rate value
To return to the default sampling rate, use the no sflow sample-rate
command.
Parameters
value
Defaults
32768 packets
Command
CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
sFlow
Description
Introduced on S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— globally sets the polling interval.
Enter the sampling rate value. Enter values in powers of 2
only; for example, 4096, 8192, 16384, and so on. The default
is 32768 packets.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
1699