protocol-tunnel destination-mac
Overwrite the BPDU destination MAC address with a specific value.
Z9500
Syntax
protocol-tunnel destination-mac xstp address
Parameters
stp
Defaults
The default destination MAC is 01:01:e8:00:00:00.
Command
CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage
When you enable VLAN-Stacking, no protocol packets are tunneled.
Information
Related
show protocol-tunnel
Command
protocol-tunnel enable
Enable protocol tunneling globally on the system.
Z9500
Syntax
protocol-tunnel enable
To disable protocol tunneling, use the no protocol-tunnel enable command.
Service Provider Bridging
Change the default destination MAC address used for L2PT
to another value.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series, and S-Series.
Introduced
— displays tunneling information for all VLANs.
1687