Radius Commands - Dell Z9500 Command Reference Manual

Version
8.3.7.0
7.7.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage To view the defined user names, use the show running-config user
Information
command.
Related
password
Commands
show running-config

RADIUS Commands

The following RADIUS commands are supported by Dell Networking OS.
debug radius
View RADIUS transactions to assist with troubleshooting.
Z9500
Syntax
debug radius
To disable debugging of RADIUS, use the no debug radius command.
Defaults Disabled.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
1628
Description
Introduced on the S4810.
Added support for the secret option and the MD5
password encryption. Extended the name from 25 to 63
characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— specifies a password for users on terminal lines.
— views the current configuration.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Security