Ipv6 Pim Neighbor-Filter - Dell Z9500 Command Reference Manual

Dell(conf-if-te-1/1)#ipv6 pim join-filter JOIN-FIL_ACL in
Dell(conf-if-te-1/1)#ipv6 pim join-filter JOIN-FIL_ACL out

ipv6 pim neighbor-filter

Prevent the system from forming a PIM adjacency with a neighboring system.
Syntax
ipv6 pim neighbor-filter {access-list}
Parameters
access-list
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.1)
8.3.19.0
8.3.12.0
8.3.1.0
Usage Do not enter this command before creating the access-list.
Information
ipv6 pim query-interval
Change the frequency of IPv6 PIM router-query messages.
Syntax
ipv6 pim query-interval seconds
To return to the default value, use the no ipv6 pim query-interval seconds
command.
Parameters
seconds
Defaults 30 seconds
1408
Enter the name of a standard access list. Maximum 16
characters.
Description
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S6000.
Enter a number as the number of seconds between router
query messages. The range is from 0 to 65535. The default is
30 seconds.
PIM-Sparse Mode (PIM-SM)