Graceful-Restart T2 - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

graceful-restart t2

Configure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for

each database to synchronize.

graceful-restart t2 {level-1 | level-2} seconds

To return to the default, use the no graceful-restart t2 command.

level-1, level-2

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the E-Series.

Enter the keywords level-1 or level-2 to identify the

database instance type to which the wait interval applies.

Enter the gracefule-restart t2 time in seconds. The

range is from 5 to 120 seconds. The default is 30 seconds.

Introduced on the Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Introduced on the E-Series.

Intermediate System to Intermediate System (IS-IS)