Dell Z9500 Command Reference Manual page 1267

Hide thumbs Also See for Z9500:

Table of Contents

prefix-list-

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

pre- 6.1.1.1

Open Shortest Path First (OSPFv2 and OSPFv3)

Enter the name of a configured prefix list.

(OPTIONAL) Enter one of the following keywords and slot/

port or number information:

For Port Channel groups, enter the keywords port-

channel then a number. For Z9500, the range is from 1

For a SONET interface, enter the keyword sonet then the

slot/port information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a VLAN, enter the keyword vlan then a number from

Introduced on the S6000-ON.

Introduced on the Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added support for the Multi-Process OSPF.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.