Dell Z9500 Command Reference Manual page 1620

password
Defaults No password is configured.
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage The software prompts users for these passwords when the method for
Information authentication or authorization used is "line".
Related
enable password
Commands
login authentication
switch.
service password-encryption
radius-server key
switch and the RADIUS host server.
tacacs-server key
server and client.
username
1620
Enter a text string up to 32 characters long. The first
character of the password must be a letter. You cannot use
spaces in the password.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the password for the enable command.
— configures an authentication method to log in to the
— encrypts all passwords configured in the system.
— configures a key for all RADIUS communications between the
— configures a key for communication between a TACACS+
— establishes an authentication system based on user names.
Security