Maximum-Paths - Dell Z9500 Command Reference Manual

Version
9.7(0.0)
9.2(1.0)
9.1.(0.0)
8.3.19.0
7.8.1.0
7.4.1.0

maximum-paths

Enable the software to forward packets over multiple paths.
Z9500
Syntax
maximum-paths number
To disable packet forwarding over multiple paths, use the no maximum-paths
command.
Parameters
number
Defaults 8
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
1354
Description
Added support for VRF.
Introduced on the Z9500.
Introduced on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
Specify the number of paths. The range is from 1 to 64. The
default is 8 paths.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)