Clear Ipv6 Fib - Dell Z9500 Command Reference Manual

Usage You can partition the LPM table to store extended IPv6 route prefixes with /65
Information to /128 mask lengths. LPM CAM partitioning requires a switch reload to take effect.
To disable LPM CAM partitioning and return the number of the IPv6 /65-/128 route
prefixes stored in Partition 1 to 0, enter the no cam-ipv6 extended-prefix
command.

clear ipv6 fib

Clear (refresh) all forwarding information base (FIB) entries on a Z9500 line card.
Z9500
Syntax
clear ipv6 fib linecard slot-id
Parameters
linecard slot-id
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.2.1.0
7.8.1.0
7.4.1.0
IPv6 Basics
Enter the slot ID of a Z9500 line card. Valid slot IDs are from
0 to 2.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
1013