Graceful-Restart T3 - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

graceful-restart t3

Configure the overall wait time before graceful restart completes.

graceful-restart t3 {adjacency | manual} seconds

To return to the default, use the no graceful-restart t3 command.

manual, 30 seconds

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The running router sets the remaining time value to the current adjacency hold

time. You can override this setting by implementing this command.

Override the default restart-wait time by entering the no graceful-restart

restart-wait command. When you disable restart-wait, the current

adjacency hold time is used.

Set the t3 timer to adjacency on the restarting router when implementing this

command. The restarting router gets the remaining time value from its peer and

adjusts its T3 value so only when you have configured graceful-restart t3

Intermediate System to Intermediate System (IS-IS)

Enter the keyword adjacency so that the restarting router

receives the remaining time value from its peer and adjusts

its T3 value so if you have configured this option.

Enter the keyword manual to specify a time value that the

restarting router uses. The range is from 50 to 120 seconds.

The default is 30 seconds.

Introduced on the Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Introduced on the E-Series.