Show Protocol-Tunnel - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Example
Dell#
Dell#conf
Dell(conf)#protocol-tunnel rate-limit 1000
Dell(conf)#
Related

show protocol-tunnel

Commands
show running-config
show protocol-tunnel
Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
Z9500
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
vlan vlan-id
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Service Provider Bridging
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series, E-Series TeraScale, and E-
Series ExaScale. Maximum rate limit on E-Series reduced
from 4000 to 3000.
Introduced
— displays tunneling information for all VLANs.
— displays the current configuration.
(OPTIONAL) Enter the keyword vlan then the VLAN ID to
display information for the one VLAN. The range is from 1 to
4094.
1689