Ip Dhcp Relay - Dell Z9500 Command Reference Manual

ip dhcp relay

Enable Option 82.
Z9500
Syntax
ip dhcp relay information-option [trust-downstream]
Parameters
trust-
downstream
Defaults Disabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
ip dhcp snooping
Enable DHCP Snooping globally.
Z9500
Syntax
[no] ip dhcp snooping
Defaults Disabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Security
Configure the system to trust Option 82 when it is received
from the previous-hop router.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
1677