Debug Lacp - Dell Z9500 Command Reference Manual

Version
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related show lacp
Commands

debug lacp

Debug LACP (configuration, events, and so on).
Z9500
Syntax
debug lacp [config | events | pdu [interface-type [in | out]]]
To disable LACP debugging, use the no [config | events | pdu
[interface-type [in | out]]] command.
Parameters
config
events
pdu
interface-type
in | out
Defaults none
Link Aggregation Control Protocol (LACP)
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays the LACP configuration.
(OPTIONAL) Enter the keyword config to debug the LACP
configuration.
(OPTIONAL) Enter the keyword events to debug the LACP
event information.
(OPTIONAL) Enter the keyword pdu to debug the LACP
Protocol Data Unit information.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Optionally, enter an in or out parameter:
• Receive enter in
• Transmit enter out
1129