Mac Learning-Limit Station-Move-Violation - Dell Z9500 Command Reference Manual

Version
8.3.19.0
8.3.11.1
8.3.12.0
Usage If you configure mac-learn-limit and the sticky MAC feature is enabled,
Information
dynamically learned MAC addresses are converted to sticky for that port. Any new
MAC address that is learned also becomes sticky for that port.
Related show mac learning-limit
Commands

mac learning-limit station-move-violation

Specify the actions for a station move violation.
Z9500
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, then the configured keyword.
Parameters
log
shutdown-both
shutdown-
offending
shutdown-
original
Defaults none
Command INTERFACE (conf-if-interface-slot/port)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
Layer 2
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— displays the details of the mac learning-limit.
Enter the keyword log to generate a syslog message on a
station move violation.
Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
Enter the keywords shutdown-offending to shut down
the offending interface and generate a syslog message.
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Description
Introduced on the Z9500.
Introduced on the S4820T.
1145