Redistribute Isis - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
6.2.1.1
Usage To redistribute the default route (0.0.0.0/0), configure the default-information
Information
originate command.
Related
default-information originate
Commands

redistribute isis

Redistribute routing information from an IS-IS instance.
Z9500
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value] [route-map map-name]
command.
Parameters
tag
level-1
level-1-2
level-2
metric metric-
value
route-map
map-name
1552
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— generates a default route for RIP traffic.
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keywords level-1 to redistribute
only IS-IS Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute
both IS-IS Level-1 and Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute
only IS-IS Level-2 routes.
(OPTIONAL) Enter the keyword metric then a number as
the metric value. The range is from 0 to 16.
(OPTIONAL) Enter the keywords route-map then the name
of a configured route map.
Routing Information Protocol (RIP)