Show Spanning-Tree Rstp - Dell Z9500 Command Reference Manual

show spanning-tree rstp

Display the RSTP configuration.
Z9500
Syntax
show spanning-tree rstp [brief] [guard]
Parameters
brief
guard
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.4.2.1
8.3.7.0
7.6.1.0
7.5.1.0
6.4.1.0
6.2.1.1
Usage The following describes the show spanning-tree rstp guard command
Information
shown in the following example.
Field
Interface Name
Instance
1586
(OPTIONAL) Enter the keyword brief to view a synopsis of
the RSTP configuration information.
(OPTIONAL) Enter the keyword guard to display the type of
guard enabled on an RSTP interface and the current port
state.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for the optional guard keyword on the C-
Series, S-Series, and E-Series TeraScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Expanded to display the port error disable state (EDS)
caused by loopback BPDU inconsistency.
Introduced on the E-Series.
Description
RSTP interface.
RSTP instance.
Rapid Spanning Tree Protocol (RSTP)