Usage
RSTP is not enabled when you enter RSTP mode. To enable RSTP globally on the
Information
system, use the no disable command from RSTP mode.
Example
Dell(conf)#protocol spanning-tree rstp
Dell(config-rstp)##no disable
Related
disable
Commands
show config
View the current configuration for the mode. Only non-default values are displayed.
Z9500
Syntax
show config
Command
CONFIGURATION RSTP (conf-rstp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Example
Dell(conf-rstp)#show config
!
protocol spanning-tree rstp
Rapid Spanning Tree Protocol (RSTP)
— disables RSTP globally on the system.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no disable
bridge-priority 16384
1585