Show Ip Pim Interface - Dell Z9500 Command Reference Manual

show ip pim interface

View information on the interfaces with IP PIM enabled.
Z9500
Syntax
show ip pim [vrf vrf-name] interface
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.8.1.0
Usage The following describes the show ip pim interface command shown in the
Information following example.
Field
Address
Interface
Ver/Mode
Nbr Count
PIM-Sparse Mode (PIM-SM)
EXEC
EXEC Privilege
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Lists the IP addresses of the interfaces participating in PIM.
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), of the interfaces participating in
PIM.
Displays the PIM version number and mode for each
interface participating in PIM:
• v2 = PIM version 2
• S = PIM Sparse mode
Displays the number of PIM neighbors discovered over this
interface.
1391