show ipv6 fib linecard
View all FIB entries.
Z9500
Syntax
show ipv6 fib [vrf vrf-name]linecard slot-id [summary | ipv6-
address]
Parameters
vrf vrf-name
linecard slot-id
summary
ipv6-address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.4.2.1
1034
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to clear the neighbor corresponding to that VRF.
Enter the slot ID of the line card. The range of Z9500 slot IDs
is from 0 to 2.
(OPTIONAL) Enter the keyword summary to view a summary
of entries in IPv6 cam.
Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is
from /0 to /128.
EXEC
EXEC Privilege
Description
Added support for VRF.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are cleared.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
IPv6 Basics