Dot1X Port-Control - Dell Z9500 Command Reference Manual

Version
8.3.11.1
8.3.7.0
7.6.1.0
7.4.1.0
Related interface range
Commands

dot1x port-control

Enable port control on an interface.
Z9500
Syntax
dot1x port-control {force-authorized | auto | force-
unauthorized}
Parameters
force-
authorized
auto
force-
unauthorized
Defaults none
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.4.1.0
1646
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
— configures a range of interfaces.
Enter the keywords force-authorized to forcibly
authorize a port.
Enter the keyword auto to authorize a port based on the
802.1X operation result.
Enter the keywords force-unauthorized to forcibly de-
authorize a port.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Security