Ntp Authentication-Key - Dell Z9500 Command Reference Manual

ntp authentication-key

Specify a key for authenticating the NTP server.
Z9500
Syntax
ntp authentication-key number md5 [0 | 7] key
Parameters
number
md5
0
7
key
Defaults NTP authentication is not configured by default. If you do not specify the option [0
| 7], 0 is selected by default.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.2.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage
After configuring the ntp authentication-key command, configure the ntp
Information
trusted-key command to complete NTP authentication.
System Time and Date
Specify a number for the authentication key. The range is
from 1 to 4294967295.
This number must be the same as the number parameter
configured in the ntp trusted-key command.
Specify that the authentication key is encrypted using MD5
encryption algorithm.
Specify that authentication key is entered in an unencrypted
format (default).
Specify that the authentication key is entered in DES
encrypted format.
Enter the authentication key in the previously specified
format.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Added options [0 | 7] for entering the authentication key.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1791