Debug Ip Ospf - Dell Z9500 Command Reference Manual

Version
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Related show ip ospf statistics
Commands

debug ip ospf

Display debug information on OSPF. Entering the debug ip ospf commands enables OSPF debugging
for the first OSPF process.
Z9500
Syntax
debug ip ospf process-id [bfd |event | packet | spf | database-
timer rate-limit]
To cancel the debug command, use the no debug ip ospf command.
Parameters
process-id
bfd
event
packet
spf
database-timer
rate-limit
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Open Shortest Path First (OSPFv2 and OSPFv3)
Description
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays the OSPF statistics.
Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
(OPTIONAL) Enter the keyword bfd to debug only OSPF BFD
information.
(OPTIONAL) Enter the keyword event to debug only OSPF
event information.
(OPTIONAL) Enter the keyword packet to debug only OSPF
packet information.
(OPTIONAL) Enter the keyword spf to display the Shortest
Path First information.
(OPTIONAL) Enter the keywords database-timer rate-
limit to display the LSA throttling timer information. This
applies to the S4810 platform only.
1259