Disable - Dell Z9500 Command Reference Manual

Related
protocol spanning-tree pvst
Commands

disable

Disable PVST+ globally.
Z9500
Syntax
disable
To enable PVST+, use the no disable command.
Defaults Disabled.
Command CONFIGURATION (conf-pvst)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
protocol spanning-tree pvst
Commands
Per-VLAN Spanning Tree Plus (PVST+)
— enter SPANNING TREE mode on the switch.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enter PVST+ mode.
1457