Description - Dell Z9500 Command Reference Manual

router does not always generate a default route into a routing domain. The router
still requires its own default route before it can generate one.
How a metric value assigned to a default route advertises depends on the metric-
style command configuration. If the metric-style command is set for Narrow
mode and the metric value in the default-information originate command
is set to a number higher than 63, the metric value advertised in the LSPs is 63. If
the metric-style command is set for Wide mode, the metric value in the
default-information originate command is advertised.
Related
•
Commands
•
•
•

description

Enter a description of the IS-IS routing protocol.
Z9500
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command ROUTER ISIS
Modes
Command
Version
History
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
1068
redistribute — redistributes routes from one routing domain to another routing
domain.
isis metric — configures a metric for an interface.
metric-style — sets the metric style for the router.
show isis database — displays the IS-IS link state database.
Enter a description to identify the IS-IS protocol (80
characters maximum).
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Intermediate System to Intermediate System (IS-IS)