Show Config - Dell Z9500 Command Reference Manual

Version
7.7.1.0
Usage
Resetting is a soft reboot, including flushing the forwarding tables.
Information
Example
Stack MAC : 00:01:e8:8b:1a:36
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status
----------------------------------------------------
0
1
2
3
4
5
6
7
8
9
10
11
Related
•
Commands

show config

Display the interface configuration.
Z9500
Syntax
show config
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
864
Description
Introduced on the S-Series.
Management online S4810
Standby online S4810
Member online S4810
Member online S4810
Member online S4810
Member online S4810
Member not present
Member not present
Member not present
Member not present
Member not present
Member not present
reload – reboots the Dell Networking OS.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
ReqTyp CurTyp Version Ports
S4810 8-3-12-1 64
S4810 8-3-12-1 64
S4810 8-3-12-1 64
S4810 8-3-12-1 64
S4810 8-3-12-1 64
S4810 8-3-12-1 64
Interfaces