Dell Z9500 Command Reference Manual page 1599

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.5(0.0)
9.2(1.0)
8.3.11.1
8.3.19.0
8.3.7.0
7.6.1.0
7.5.1.0
6.3.1.0
Usage
In the example below, TACACS+ accounting is used to track all usage of EXEC
Information
command and commands on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1 for
example, use the aaa accounting command 1 command. If you want to track
usage by role name for the secadmin, for example, use aaa accounting
command role secadmin.
Example
Dell(conf)# aaa accounting exec default start-stop tacacs+
Dell(conf)# aaa accounting command 15 default start-stop tacacs
+
Dell(conf)# aaa accounting command role secaadmin default
start-stop tacacs+
Related
enable password
Commands
login authentication
password
tacacs-server host
Security
Description
Added support for roles on the Z9500.
Added support for roles on the Z9000, S6000, S4820T,
S4810, and MXL
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the password for the enable command.
— enables AAA login authentication on the terminal lines.
— creates a password.
— specifies a TACACS+ server host.
1599