Show Ip Route Summary - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Example
Dell#show ip route list test
Codes:C- connected, S - static, R - RIP,
Locally Originated,
type 1,
default,
Gateway of last resort is not set
R
R
R
R
C
Related
ip prefix-list
Commands
prefix list.
show ip prefix-list summary

show ip route summary

View a table summarizing the IP routes in the switch.
Z9500
Syntax
show ip route summary
982
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
B- BGP, IN - internal BGP, EX - external BGP,LO -
O- OSPF, IA - OSPF inter area, N1 - OSPF NSSA external
N2- OSPF NSSA external type 2, E1 - OSPF external type 1,
E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2- IS-IS level-2, IA - IS-IS inter area, * - candidate
>- non-active route, + - summary route
Destination Gateway
----------- -------
2.1.0.0/24 via 2.1.4.1, Te 2/43
2.1.1.0/24 via 2.1.4.1, Te 2/43
2.1.2.0/24 via 2.1.4.1, Te 2/43
2.1.3.0/24 via 2.1.4.1, Te 2/43
2.1.4.0/24 Direct, Te 2/43
— enters CONFIGURATION-IP PREFIX-LIST mode and configures a
— displays a summary of the configured prefix lists.
Dist/Metric Last Change
----------- -----------
120/2 3d0h
120/2 3d1h
120/1 3d0h
120/1 3d1h
0/0 3d1h
IPv4 Routing