Ip Msdp Shutdown - Dell Z9500 Command Reference Manual

ip msdp shutdown

Administratively shut down a configured MSDP peer.
Z9500
Syntax
ip msdp shutdown {peer address}
Parameters
peer address
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
8.3.19.0
8.3.11.1
8.3.7.0
6.2.1.1
ip multicast-msdp
Enable MSDP.
Z9500
Syntax
ip multicast-msdp
To exit MSDP, use the no ip multicast-msdp command.
Defaults Not configured.
Command CONFIGURATION
Modes
Multicast Source Discovery Protocol (MSDP)
Enter the peer address in a dotted decimal format (A.B.C.D.).
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced
1229