Ip Ssh Password-Authentication - Dell Z9500 Command Reference Manual

Parameters
512-869
Defaults Key size 768
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage The server-generated key is used for SSHv1 key-exchange.
Information

ip ssh password-authentication

Enable password authentication for the SSH server.
Z9500
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-
authentication enable command.
Parameters
enable
Defaults Enabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
Security
Enter the key-size number for the server-generated RSA
SSHv1 key. The range is from 512 to 869. The default is 768.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword enable to enable password-
authentication for the SSH server.
1659