Dell Z9500 Command Reference Manual page 1304

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage The following describes the show ip ospf process-id database external
Information
command shown in the following example.
Field
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Network Mask
Metrics Type
1304
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The
following options can be found in this item:
• TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
• E or No E is displayed on whether the originating router
can accept AS External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Identifies the link state sequence number. This number
enables you to identify old or duplicate LSAs.
Displays the Fletcher checksum of the LSA's complete
contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the external type.
Open Shortest Path First (OSPFv2 and OSPFv3)